• 100% Pure silicone with a high quality matt finish
• Anti-fungal - Protects against mould, mildew and bacteria
• Non-staining formula - suitable for natural stone and marble
• Easy to tool and highly flexible - Movement capability up to 50%
• Excellent adhesion to most surfaces - Plastics, tiles, paint, glass, metals
• Outstanding UV resistance - Anti-aging and weather resistant
• Advance low odour formulation

Available colours:

• White
• Jasmine
• Limestone
• Beige
• Grey beige
• Light grey
• Dark grey
• Anthracite
• Translucent

Please note:

• Colour matched Rocatex flexible grouts are available

An advanced low modulus, neutral curing, non-staining, matt finish, anti-mould, pure silicone sealant and adhesive. Suitable for bathrooms, kitchens, wetrooms, natural stone & marble, tiling, plumbing, sanitary, expansion joints, glazing, construction and roofing. Suitable for interior and exterior applications.

APPLICATION

Surfaces must be dry, firm, free from all loose material and contaminants such as dirt, dust, grease etc. Porous substrates must be primed. Apply the sealant firmly into or along the joint. Joint dimensions should be at least 5 x 5mm for indoor and 10 x 8mm (w x d) for outdoor applications. With increasing joint width (up to 30mm), joint depth should be roughly half the joint width. The sealant should be smoothed using a suitable tool and water or non-staining water-based smoothing agent. Working time is approximately 30 minutes (15 minutes for translucent). Do not apply in temperatures below 5°C or above 35°C. ROCATEX FGS Ultimate Silicone must not be used in aquarium construction, as a mirror adhesive or for underwater applications. Not suitable for plastics with generally poor adhesion to silicones (e.g. PE, PP, PET).

YIELD

Metres of joint per 310ml cartridge for the following joint dimensions:

5 x 5mm        approx.  12m

10 x 10mm    approx. 3m

STORAGE

Store unopened, clear of the ground, in a cool, dry, frost free environment.

CURING

Rate of curing depends on temperature, humidity and depth of substrate. The data given refer to tests at standard conditions (23°C / 50% relative humidity). Under these conditions, a 10 x 10mm joint will cure in 8 to 14 days. Low temperature, low humidity and joint depth above 15mm will retard skin formation and curing significantly. Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colours. They are not meant for specification purposes.

DECLARED PERFORMANCE

HEALTH & SAFETY

Contains 2-butanone oxime. May produce an allergic reaction. Translucent contains 3-aminopsopyl. Contains a biocide: Carbendazim, silver. Harmful if swallowed. Avoid contact with skin and eyes. In the case of contact with eyes, flush immediately with water and seek medical attention. Use in well ventilated areas. Keep out of reach of children. Do not breathe in vapour. Qualified medical attention should always be sought. For further information, please request the Material Safety Data Sheet for this product.